Steel Wire Fences Types
Modern fences are not only a reliable protection of your territory, but also its decoration – steel wire fences look light and aesthetically pleasing. Welded mesh fences are widely used for fencing objects for various purposes - these are sports fields and stadiums, industrial facilities and public institutions, parking lots, schools, parks and much more. Metal fences made of welded mesh can be used to protect almost any object, while they always fit well into the surrounding landscape. Chain-link metal fences are highly durable and reliable, they are made of components and materials with a protective zinc and polymer coating, due to which they are successfully used to protect important objects, with increased requirements for their safety, in difficult meteorological conditions. Chain-link fences are a reliable formidable obstacle and have a long service life.
Welded Panel Fence
Modern industry produces modern, high-quality and efficient fences from welded panels - welded sections and rectangular posts for the manufacture of metal fences. Panels are produced in series from a welded mesh 2.5 meters wide with a cell size of 50x200 mm (width and height) from metal bars with a diameter of 6 mm (paired horizontal bars) and 5 mm (vertical bars). In order to give the fence sections a more aesthetic appearance and protect against corrosion, their surface is coated with polymer powder paint or galvanized.
The color scale of welded panels for fences is various. Welded panels are produced in series in green and white, RAL 6073 and RAL 9010 respectively. If necessary, panels for fences of other colors are available - yellow RAL 1012, red RAL 3002, blue RAL 7030, black RAL 9005 and gray RAL 7030. Rectangular posts for mounting metal fences from welded panels are also mass-produced. Poles are made in two versions - elongated for embedding in concrete and with a square base for anchoring. Just like welded panels, poles are coated inside and out with polymer powder paint or galvanized for corrosion protection. The color range of the produced poles corresponds to the color range of the welded fence panels.
Chain Link Fence
To protect objects with increased requirements for their safety, you can use a reinforced metal fence made of chain-link mesh. The fence has great strength and reliability, well resists both the effects of atmospheric phenomena - rain, strong wind, and attempts by violators to overcome it. Structurally, the fence https://egoza.ua/en/catalog/fences is a chain-link mesh, reinforced on racks of a special design and reinforced with additional rods. The fence design uses a chain-link mesh with a cell of 40x40 mm, made of steel wire with a diameter of at least 3.5 mm, galvanized and coated with a protective polymer layer to protect against corrosion. The width of the web (fence height) is 2.4 meters, the wire threads along the edges of the mesh at the bottom and top of the fence are twisted, the twists are cut at an angle of 45 degrees to create sharp spikes. The posts on which the mesh is fixed are made of 3-1/2" pipe (end and corner) and 3" (intermediate). The posts are zinc and polymer coated for corrosion protection. All fittings and hardware used in the manufacture of the fence have a protective zinc and polymer coating to eliminate the possibility of corrosion.
Along the entire perimeter of the fence, a linear wire with a diameter of at least 3.5 mm is stretched in four rows, galvanized and coated with a polymer protective layer. The wire is stretched using special tension devices installed on the poles. To fix the grid to the linear guides, a steel wire with a diameter of 2.5 mm or more with a protective zinc and polymer coating is used, fixing is carried out every 300 mm. A concrete base is created along the entire perimeter of the fence, into which the pillars are installed and to which the grid is fixed. The mesh is attached to the concrete base of the fence with cotter pins with a diameter of at least 3.5 mm, coated with a protective zinc and polymer coating, which are attached to the lower edge of the mesh and inserted into the concrete to a depth of 150 mm with a step of at least 750 mm.
Such a metal fence is a highly reliable and formidable structure, and can be used to protect important civil, commercial or special defense facilities. The quality of the material, the protective coating and the high strength of the fence design make it possible to use it in the conditions of Central Asia, the Middle East and Africa to create highly efficient fences that are not afraid of difficult meteorological conditions and have a long service life.